Table of Contents
Advertisement
Mystic OM.book Page 35 Wednesday, October 22, 2003 8:59 PM
To change the U.I.C. selection:
1. Press [MENU].
2. At the
Menu
[ENTER].
3. At the
VHF Menu
press [ENTER].
4. At the
U.I.C. Selection
selection you want, and press [ENTER].
5. You will be returned to the VHF screen, with the appropriate icon
(
,
USA
INT
Directory
The Directory is used to store the names of ships. These names are used
for Digital Selective Calling (DSC). The DSC functions are covered in
Advanced VHF Operations, beginning on page 90.
To enter names in the Directory:
1. Press [MENU].
2. At the
Menu
[ENTER].
3. At the
VHF Menu
and press [ENTER].
4. The only entry you should see at the
point is
New User
5. At the Edit User screen, press [ENTER]. The
highlighted, indicating you can enter a ship's name. Press
[ENTER].
6. Use the alphanumeric keypad to enter the data using the
technique covered in the previous Section ("Entering Data" on
page 28). Directory names can be up to 12 characters long.
7. When you have entered the Ship's Name, highlight
[ENTER] to accept the entry. The MMSI field is now highlighted.
Press [ENTER]. Use the technique shown on page 31 to enter the
Ship's MMSI number. When you are finished, press [ENTER].
Highlight
Directory.
You can now add more Ship's Names and MMSI numbers using the same
procedure. You can enter up to names in the directory. If you try to add
more than 99, you'll see an
screen, use
and
screen, use
Menu, use
, or
) displayed.
CAN
screen, use
and
screen, use
. Press [ENTER].
and press [ENTER] to store the information in the
OK
message.
ERROR
35
to highlight
and press
VHF
and
to highlight
U.I.C.
and
to highlight the
to highlight
and press
VHF
and
to highlight
Directory
screen at this
Directory
field is
Name
and press
OK
and
Hide quick links:
Advertisement
Table of Contents
