Uniden MYSTIC Owner's Manual page 60

Mystic OM.book Page 58 Wednesday, October 22, 2003 8:59 PM
3. At the Setup Menu, use
highlight the setting you want to change
and press [ENTER].
You can change the default setting for any
of the following:
RF Select
Initialize
Nav Screens
Coord System
Map Datum
Elev Mode
Time Format
Nav Units
North Reference
Daylight Savings
Light Timer
Beeper
Clear Memory
NMEA
Baud Rate
Simulate
Language
At this menu, you can change the default settings. When you select
any of the items, you will see a different selection menu.
Use and
and press [ENTER]. In some cases you have a second list to choose
from. Use the same procedure to select the value. When you are
finished with all the changes, press [ESC] to return to the Channel
Display. Each of the settings are discussed in the following
paragraphs.
RF Select
The procedure for
Initialize
You can initialize the MYSTIC at any time. Select
When you press [ENTER], the unit will initialize from the beginning, as
described on page 55.
and
to highlight the value you want
is covered on page 33.
RF Select
58
to
Setup Menu
RF Select
Initialize
Nav Screens
Coord System
Map Datum
Elev Mode
Time Format
Nav Units
North Reference
Daylight Saving
Light Timer
Beeper
Initialize
.