Channel Tag - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 38 Wednesday, October 22, 2003 8:59 PM
Editing a FIPS code
1. Press [MENU].
2. At the
Menu
3. At the
VHF Menu
4. At the
FIPS
have selected the Code, press [MENU].
5. At the new screen, select
6. At the
FIPS xx
same way as you did when you entered the data.
7. When you have edited all the digits, press [ENTER]. The highlight
will move to the
do not want this entry, press
Cancel
8. The new code is now saved, and the screen returns to the
Menu.
You can now edit another FIPS code, or enter a new one using the
procedures above.
Deleting a FIPS code
1. Press [MENU].
2. At the
Menu
3. At the
VHF Menu
4. At the
FIPS
have selected the code, press [MENU].
5. At the new screen, select
[ENTER]. The FIPS Code you selected will be deleted and you will
return to the
6. Press [ESC] twice to return to the VHF screen.

Channel Tag

You can apply a name (such as
Marine Channel. You can apply separate names to the channels in the
USA, International, and Canadian channels. The maximum name size is
12 characters. (All Channels come pre-programmed from the factory.)
Note: You cannot add a Channel Tag to the WX channels.
screen, select
VHF
screen, select
Menu, select the Code you want to edit. When you
Edit Location
dialog box, press [ENTER]. Edit the field the
box. Press [ENTER] to accept the entry. If you
OK
to move the highlight to the
box and press [ENTER].
screen, select
VHF
screen, select
Menu, select the code you want to delete. When you
Delete Location
Menu.
FIPS
DISTRESS
38
and press [ENTER].
and press [ENTER].
FIPS Code
and press [ENTER].
and press [ENTER].
and press [ENTER].
FIPS Code
and press
, , etc.) to each
PORT OPS
FIPS