Accessing Waypoints In The Database - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 98 Wednesday, October 22, 2003 8:59 PM
To add a message to a Waypoint you are
creating, highlight the
and and press [ENTER].
The same keyboard you used to enter the
you to enter a message. Using the same method as for
up to 30 characters long.
Message
When you have the
[ENTER]. You are returned to the
displayed.

Accessing Waypoints in the Database

All stored waypoints, whether user-input or preloaded, can be found in the
Waypoint Database. You will need to access waypoints in the database
whenever you are editing waypoints, activating a GOTO route or creating
a multileg route. There are three major types of categories that need to be
explained: User, Preloaded and Uploaded:
User
These are waypoints that you have saved using the MARK
function of the receiver. There can be up to 500 user-entered
waypoints stored in memory. Select User Waypoint in the list.
Preloaded
These are waypoints that are included in the base map that was
installed in your MYSTIC. The categories of preloaded waypoints
are: Cities, Highways, Airports, Waterways and Parks. The
MYSTIC has an additional set of marine preloaded categories:
Fixed Navaid, Buoys, Lighthouses, Marinas and Obstructions.
field using
Message
the way you want it, highlight
Message
screen with the new
Mark
98
is displayed, allowing
Name
, enter a
Name
and press
OK
Message