Routes - Uniden MYSTIC Owner's Manual

Mystic OM.book Page 100 Wednesday, October 22, 2003 8:59 PM
go to the first waypoint beginning with
Press [OUT] to go in the reverse direction (
Nearest To
Nearest To provides you with a way to find the waypoints nearest
to a waypoint you select. Set
press [ENTER]. You will see waypoints in the category you
selected nearest to your present position. Once you see the
display with the waypoints nearest to your position, you can
change position to any waypoint in the database, or to your cursor
if you are in the Cursor Mode on your Map screen.

Routes

1-leg Route
You can create, and set as the active route, a 1-leg Route with your
present position as the starting point and a destination Waypoint that
you choose from the Waypoint Database. A 1-leg Route is similar to a
GOTO, except you can save it in Memory.
To create a 1-leg route:
1. From any Map Screen, press [MENU].
2. At the Map Menu, select
3. At the
Routes
and press [ENTER].
4. Select Starting Waypoint, and press [ENTER].
5. At the
Waypoint Database
use and
selecting Waypoints, see page 50.) Press [ENTER].
6. Use and
[ENTER].
7. Repeat Steps 3 through 5 above to select the Destination
Waypoint.
8. Use and
the Route.
Find By
, and press [ENTER].
Routes
Menu, select any empty Route (series of dashes)
, select the Waypoint Category and
to select the Waypoint. (For more information on
to select the next leg of the Route (dashes). Press
to select
Save Route
100
, and then and so forth.
B C
, , ).
C B A
is set to
Nearest To
and press [ENTER] to save
and