CipherLab 9700 User Manual page 28

To start the inventory using scanner, follow the steps:
1. On the Mobile Assistant main screen, click Inventory as shown on Figure 29.
2. On the Inventory screen, scan the item and then press ENT on the scanner's keyboard.
3. (Optional) If you need to edit the scanned item data or the scanned item doesn't exist in the database
and you want to add it to the inventory, do one of the following:
To edit the scanned item data, click Setup. For more information, see
o
To add new item, follow the steps as shown on Figure 30:
o
a. On the Item Not Found screen, click Yes or press ENT on the scanner's keyboard.
b. On the Add Item screen enter the item's data and click Save.
NOTE! The fields on the Add Item screen correspond to fields on the Item Setup screen. For more
information, see Setting up Items on page 20 (go to step 2).
© Petrosoft LLC. All rights reserved. Confidentiality level – Internal use
FIGURE 29 Scanning an item
FIGURE 30 Adding new item
CIPHERLAB 9700 WITH MOBILE ASSISTANT APPLICATION
Setting up Items
/ Version 1.1
on page 26.
28