CipherLab 9700 User Manual page 16

Launching Mobile Assistant First Time
To launch Mobile Assistant on the device first time after installation, follow the steps:
1. On your scanner, click Start > Programs > Mobile Assistant or click the Mobile Assistant icon on
the scanner's desktop.
2. In the dialog window that opens, click OK.
Once you set up the station, the Set up the Station ID in Options dialog window doesn't appear any more
when launching the application. For more information, see
Configuring Mobile Assistant
To configure the Mobile Assistant application on the scanner, follow the steps:
Step
Step 1: (Optional) Set up station from CSO account
Step 2: Synchronize Price Book
Setting up Station
Setting up the station is needed when you first run the Mobile Assistant application. CipherLab 9700 scanner
synchronizes through Mobile Assistant with one station at a time.
To work with another station, you can do one of the following:
You can use the same scanner and setup another station on it (see steps 1-3 described below).
•
You can purchase one more scanner to setup another station on it.
•
© Petrosoft LLC. All rights reserved. Confidentiality level – Internal use
FIGURE 11 Launching Mobile Assistant first time
CIPHERLAB 9700 WITH MOBILE ASSISTANT APPLICATION
Setting up Station on page 16.
Step description in manual
Setting up Station on page 16
Synchronizing Price Book
/ Version 1.1
on page 18
16