CipherLab 9700 User Manual page 15

NOTE! Every time you connect your handheld to PC, make sure you click the Connect without
setting up your device button on WMDC.
Installing Mobile Assistant
To install the Mobile Assistant application on the scanner after connecting it to your PC or laptop, follow the
steps:
1. Download the Mobile Assistant installation files from the web site.
2. Launch the Mobile Assistant installation by double clicking the setup file.
3. In the Mobile Assistant Setup Wizard, click Next as shown on Figure 10.
4. Wait until wizard installs the Mobile Assistant application and its components on the scanner.
For successful components installation, do the following for each component:
a. Confirm the component installation on scanner's screen.
b. Wait until the component is installed on the scanner.
c. In the wizard on the laptop or PC screen, click OK.
5. After installation is complete, close the installation wizard and launch Mobile Assistant on the device.
For more information, see
© Petrosoft LLC. All rights reserved. Confidentiality level – Internal use
FIGURE 10 Mobile Assistant Setup Wizard
Launching Mobile Assistant First Time
CIPHERLAB 9700 WITH MOBILE ASSISTANT APPLICATION
at page 16.
/ Version 1.1
15