Controls; Mounting The Colour Changer - Event Lighting FOLLOW600 User Manual

CONTROLS

MOUNTING THE COLOUR CHANGER (included)
The FOLLOW600 includes a 6-colour colour changer unit, which is packed separately in the flight case. If
required, this unit can be mounted onto the lens tube of the followspot.
Installation Steps:

Pull up the clip mounted on the top of the lens tube of the followspot.

Position the color changer unit on the front plate of the followspot, making sure that the color levers are
positioned on the left-hand side of the followspot when viewed from the front.

Carefully place the colour changer onto the front of the followspot by lowering it into position until it sits
properly in the holders on the lens tube.

Lock the clip to fix the colour changer unit in place.

Use the provided safety wire to secure the colour changer unit to the followspot.
www.eventec.com.au
7