Page 1
For safety, please read this user manual carefully before initial use. Event Lighting reserves the right to revise the manual at any time. Information and specifications within this manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any errors or omissions.
www.event-lighting.com.au Safety Instructions WARNING • Do not open this device, there is no user-serviceable parts inside. Risk of electric shock. • Do not look at the light source when the device is on. • CAUTION: This unit's housing may be hot during and after operation. •...
www.event-lighting.com.au CONTROL BOARD OPERATION Press the Menu until one of the following had been displayed: Display Function 1.DMX Address To set DMX address 2.DMX Channel To set DMX channel modes: CH 3, 5, 6, 8, 9, 12, 18, 36 3.Sound Mode To set sound active mode and the sensitivity (Sen 000 ~ Sen100) 4.Static Color To set static colors...
Page 6
www.event-lighting.com.au se “Up” and “Down” to select the operating speed of the auto program (Sp 000 ~ Sp100, freeze, slow ~ fast) PR 01 4 colors switching PR 02 15 colors switching PR 03 Color Macros PR 04 Auto chasing 1 PR 05 Auto chasing 2 PR 06...
Page 7
www.event-lighting.com.au DMX CHART Channel Function Ch12 Ch18 Ch36 Red 0%-100% Green 0%-100% Blue 0%-100% Dimmer for RGB 0%-100% No function Strobe (slow to fast) No function 4 colors switching 15 colors switching Color Macros Auto chasing 1 Auto chasing 2 Auto chasing 3 Auto chasing 4 Auto chasing 5...
Page 8
www.event-lighting.com.au LED1-LED3 Blue 0%-100% LED4-LED6 Red 0%-100% LED4-LED6 Green 0%-100% LED4-LED6 Blue 0%-100% LED7-LED9 Red 0%-100% LED7-LED9 Green 0%-100% LED7-LED9 Blue 0%-100% LED10-LED12 Red 0%-100% LED10-LED12 Green 0%-100% LED10-LED12 Blue 0%-100% LED1-LED2 Red 0%-100% LED1-LED2 Green 0%-100% LED1-LED2 Blue 0%-100% LED3-LED4 Red 0%-100% LED3-LED4 Green 0%-100% LED3-LED4 Blue 0%-100%...
Need help?
Do you have a question about the PIXBAR12x3 and is the answer not in the manual?
Questions and answers