03. TO FIT AND REMOVE THE REAR WHEELS
A
To fit the rear wheels, insert each wheel axle into the moulding and push in
until locked. You should hear a 'click' which indicates the wheel has locked in.
Pull on the wheel to make sure it is engaged. Repeat the process if not locked
in.
B
To remove the wheels, pull the metal latch downwards on the underneath of
the brake moulding to release the wheel, and then pull the wheel off.
A
04. TO USE THE SWIVEL WHEELS
A
Press the swivel lock down to lock the swivel wheels.
Push the swivel wheel lock up to allow the wheels to swivel.
Note: Always lock the swivel wheels when using the stroller on rough
surfaces as it will minimise wheel wobble.
B
www.britax.com.au
Metal
Latch
9