Advertisement
NOTE: Make sure the cover is slightly inclined from the top after step 4.
5. Pull the cover off in the indicated direction and carefully keep it aside without damaging the open flaps.
13. Operation
13.1 Configuring and activating the unit
1. Use the Enphase Installer App to commission the IQ Battery(ies). Once connected to the IQ Gateway, refer to the
Enphase Installer App help topics for more information.
Each 5 kWh unit of IQ Battery 10C is provided with two sets of serial number stickers. One set of serial number stickers will be
pasted on the bottom right corner of the chassis and the other is provided in the accessory bag.
4
Lift here
5
EN-34
Advertisement
Need help?
Do you have a question about the IQ Battery 10C and is the answer not in the manual?