enphase IQ Battery 10C Quick Install Manual page 12

5. Tools required
Enphase accessory:
Lifting handles: B05C-LH-0180-O
Drill
6. Additional items required
6x #20 (5/16") lag bolts or screws with washer
to install the mounting bracket on the wall
Copper conductors- No. 8-3 AWG (11 mm or
7/16" strip length) (rated at 90°C) for terminals
NOTE: Conduit fittings must be NEMA Type 3R certified when installing outdoors.
Measuring tape
Protective gloves
Conduits and fittings Up to 1.25 in (32 mm)
Enphase SKU for control cable: CTRL-SC3-
NA-01
EN-12
Pencil and level
Torque wrench Cable stripping tool
Hex drives Screwdriver - At least
8" long
AC breaker - 40 A for one
IQ Battery 10C or 80 A for
two IQ Battery 10C (used inside
IQ Combiner 6C)