Event Lighting FOLLOW1K User Manual page 3

Safety Instructions
WARNING

Only qualified personnel should handle the installation, operation, and maintenance of this
device.

Users must strictly adhere to the instructions provided in this manual.

Unqualified individuals are not permitted to open the housing cover or operate the device.
Failure to comply with this requirement will void any liability for defects or issues on the part of
the dealer.

The device must be protected from rain and moisture at all times.
Power Supply and Safety Guidelines

Power Supply: AC100V-240V, 50Hz/60Hz.

Before Connection: Ensure the power switch is off, and verify that the power plug, outlet,
and earth connection are in good condition before connecting the device to the mains.

Use Qualified Components: Only use a certified power plug and outlet. Never connect the
power cord of this device to other electrical equipment.

Handling Precautions: When moving or installing the device, ensure it does not come into
contact with metal parts or other materials that could cause damage.

Power Disconnection: Always disconnect the device from the mains during installation,
dismantling, or maintenance.
Installation and Operation

Distance Requirements: Maintain a minimum distance of 50 cm between the light output
and the illuminated surface.

Surface Safety: Install the device only on non-flammable surfaces. To ensure proper
ventilation, leave at least 50 cm of free space around the device. Note that heat-sensitive
objects may deform or become damaged due to emitted heat.

Heat Warning: The housing becomes very hot during operation. Allow the device to cool for
at least 15 minutes after switching it off before handling it.

Temperature Limits: Do not exceed the maximum ambient temperature (Ta) of 45°C or the
maximum housing temperature (Tb) of 60°C.

Indoor Use Only: This device is designed exclusively for indoor use.
Maintenance and Cleaning

Damaged Components: Replace any cracked protective shields, filters, or lenses
immediately.

Cleaning Schedule: Clean the protective shield, filters, and lens weekly, as smoke fluid
residue can accumulate and quickly reduce light output.
2awqeewqewq
www.eventec.com.au
2