1. Manuals
  2. Brands
  3. Aplex Manuals
  4. Industrial PC
  5. ACS-231 A Series
  6. User manual

Aplex ACS-231 A Series User Manual

Intel elkhart lake processor embedded system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ACS-231xA
Intel Elkhart Lake Processor Embedded System
User Manual
Release Date
Revision
JUL. 2024
V1.5
®2024 Aplex Technology, Inc.
All Rights Reserved.
Published in Taiwan
Aplex Technology, Inc.
15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan
Tel: 886-2-82262881 Fax: 886-2-82262883 Email:
aplex@aplex.com
URL:
https://www.aplex.com
ACS-231xA User Manual
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ACS-231 A Series and is the answer not in the manual?

Questions and answers

Related Manuals for Aplex ACS-231 A Series

Summary of Contents for Aplex ACS-231 A Series

  • Page 1 Intel Elkhart Lake Processor Embedded System User Manual Release Date Revision JUL. 2024 V1.5 ®2024 Aplex Technology, Inc. All Rights Reserved. Published in Taiwan Aplex Technology, Inc. 15F-1, No.186, Jian Yi Road, Zhonghe District, New Taipei City 235, Taiwan Tel: 886-2-82262881 Fax: 886-2-82262883 Email: aplex@aplex.com...

  • Page 2: Revision History

    Revision History Reversion Date Description 2023/09/06 Official Version 2024/5/28 2.1 Delete Storage PCIe support 2.4 LAN indicator 2024/6/4 Modify M/B I/O picture 2024/6/17 Add 1.5 2024/6/25 Add ACS-2311A 2024/7/9 Modify ACS-2310A & ACS-2311A dimension & drawing on page6 & Page8 ACS-231xA User Manual...
  • Page 3 __________________________ Warning!_ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.

  • Page 4: Packing List

    Packing List Accessories (as ticked) included in this package are: □ Adaptor □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆...

  • Page 5: Table Of Contents

    Table of Content Revision History ....................1 Packing List ......................3 Figures ........................ 4 Chapter 1 Getting Started ..............5 1.1 Features ......................5 1.2 Specifications ....................5 1.3 Dimensions..................... 8 Figure 1.1: Dimensions of ACS-231xA ..............8 1.4 Brief Description of ACS-231xA ................. 9 Figure 1.2: Overview of ACS-231xA ...............

  • Page 6: Chapter 1 Getting Started

    Chapter 1 Getting Started 1.1 Features ⚫ Onboard Intel® Atom® x6000 series, Pentium & Celeron N and J series Processors ⚫ 1 x SO-DIMM slot, support up to DDR4 32GB 3200MHz SDRAM ⚫ 2 x USB 3.2 Gen1 type A ⚫...
  • Page 7 1 x 2.5GbE LAN RJ45 (i225LM) 1 x DP 1.4 include DP++, up to 4096 x 2160 @60Hz HDMI 1 x HDMI2.0b, up to 3840 x 2160 @60Hz Audio 1 x Line-out 1 x power LED light 1 x power LED light 1 x 3-pin DC power input terminal 1 x 3-pin DC power input terminal block Power...
  • Page 8 Mounting Wall mount(default)/Din Rail (option) Environmental 0~50 °C Operating (WT1 -20~60°C/ -20~60 °C Temperature WT2 -20~70°C for option) Storage -40~85 °C Temperature Storage 10%~90%@ 40°C, non-condensing Temperature Certificate CE / FCC Class A 1 x TPM2.0 Operating Microsoft®Win10 IoT, Win11 IoT, LINUX Kernel 5.15 (Ubuntu 22.04)_ACS-2310A System Microsoft®Win10 IoT, Win11 IoT,...

  • Page 9: Dimensions

    1.3 Dimensions ACS-2310A ACS-2311A Figure 1.1: Dimensions of ACS-231xA ACS-231xA User Manual...

  • Page 10: Brief Description Of Acs-231Xa

    1.4 Brief Description of ACS-231xA The ACS-231xA Series is a compact embedded system powered by the Intel Elkhart Lake J6412 processor. It supports up to 32GB of DDR4 memory and offers a range of connectivity, including 1 x DP, 1 x HDMI 2.0, 1 x COM, 2 x GbE LAN ports, 2 x USB 3.2 ports interfaces;...

  • Page 11: Din-Rail Mounting /Booking Mounting (Optional)

    1.5 DIN-rail Mounting /Booking Mounting (optional) Suggested Installation Method STEP 1: Hold the DIN rail lower lip kit on the mounting rail. STEP 2: Press the device against the upper mounting rail until it snaps into place Suggested Removal Method STEP 1: Pull the device up and off the DIN rail with the upper lip off the rail.

  • Page 12: Chapter 2 Motherboard

    Chapter 2 Motherboard SBC-7127 is a 3.5” industrial motherboard developed on the basis of Intel Elkhart Lake, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features two GbE ports, 4-COM ports and one Mini PCIE and one M.2 2230 configuration.
  • Page 13 2 x 2wired RS485 via pitch 2.0mm 2x5pin header (COM3) GPIO 8-bit digital I/O by Pin header (GPIO2) 4-bit digital Input 4-bit digital Output Audio Support Audio via Realtek ALC888S-VD2 HD audio codec 1x Line out via 3.5mm audio jack Support Line-in,Line-out,MIC by 2x6-pin header Expansion Slots 1 x full-sized mini-PCI-express slot (MPCIE1) with micro SIM slot...

  • Page 14: Board Dimensions

    2.2 Board Dimensions Dimensions: 146 x 101.6 (units :mm) Figure 2.1: Dimensions of motherboard SBC-7127 ACS-231xA User Manual...

  • Page 15: Jumpers And Connectors Location

    2.3 Jumpers and Connectors Location Figure 2.2: Top of motherboard SBC-7127 Figure 2.3: Bottom of motherboard SBC-7127 ACS-231xA User Manual...
  • Page 16 ACS-231xA User Manual...

  • Page 17: Jumpers Setting And Connectors

    2.4 Jumpers Setting and Connectors 1. CPU1: (FCBGA1493) Onboard Intel Elkhart Lake SoC. Model Numbe Cores/ Remarks Threads SBC-7127-J6412 J6412 2.0~2.6GHz 4 / 4 Default SBC-7127-X6425E X6425E 2.0~3.0GHz 4 / 4 Option 2. DDR4_1: (SO-DIMM 260Pin slot) DDR4 memory socket, the socket is located at the top of the board and supports 260Pin 1.2V DDR4 SO-DIMM memory module up to 32GB.
  • Page 18 Switch Open Close Pin1-2 Default, PWRBTN-ON Auto-PSON Pin3-4 ATX Mode Default, AT Mode Pin5-6 Default, Normal Close 1sec to Clear CMOS Pin7-8 Default, Normal Write EDID Pin9-10 Default, LVDS Dual CH. LVDS Single CH. Pin11-12 Default, LVDS 6 bit Signal LVDS 8 bit Signal CMOS clear switch, CMOS clear operation will permanently reset old BIOS settings to factory defaults.
  • Page 19 Pin# Power Input Pin1 DC_IN+ (DC+9V~36V) Pin2 DC_IN- (Ground) 7. CN1: (2.00mm Pitch 1x4 Pin Header) For onboard MCU service. Pin# Signals nRST TICECLK TICECDAT 8. CN2: (1.25mm Pitch 2-Pin Wafer) Connect to ambient light sensor to support auto light sensing function.
  • Page 20 LA_D3_P LA_D3_N LA_CLKP LA_CLKN LB_D0_P LB_D0_N LB_D1_P LB_D1_N LB_D2_P LB_D2_N LB_D3_P LB_D3_N LB_CLKP LB_CLKN USB3 USB3_CN3_P USB3_CN3_N USB3 5V_S5 5V_S5 Power LED+ PWR_LED+ Power LED- 10. INVT1: (2.0mm Pitch 1x8 wafer Pin Header) Provide backlight power & control for LVDS. Pin# Signal Name 12V_S0...
  • Page 21 12. HDMI1: (Vertical HDMI Connector) HDMI Interface connector. HDMI 1.4, Support resolution up to 3840x2160@30H. 13. LAN1 ® (RJ45 Connector) Provide 10/100/GbE LAN via Intel I210-AT. Active/Link LED Indicators Status Description 10Mbps Yellow 100Mbps Green 1Gbps 14. LAN2 ® (RJ45 Connector) Provide 10/100/1000/2.5GbE LAN via Intel I225-LM/I226-LM.
  • Page 22 16. F_AUDIO1: (2.0mm Pitch 2x6 Pin Header) Provide line-in/line-out/mic-in via onboard Realtek ALC888S codec. Signal Name Pin# Pin# Signal Name 5V_S5 GND_AUD LINE-OUT-L LINE-OUT-R FRONT_JD LINE_JD LINE-IN-L LINE-IN-R MIC-IN-L MIC-IN-R GND_AUD MIC1_JD 17. USB3_1 (Double stack USB type A) Rear USB3.2 connector, provides up to 2 USB3.2 gen2/USB2.0 ports, USB3.2 gen2 allows data transfers up to 10.0Gbps.
  • Page 23 (2.0mm Pitch 2x5 Pin Header) Provide 2xUSB2.0 signals. Signal Name Pin# Pin# Signal Name 5V_USB47 5V_USB47 USB4_N USB7_N USB4_P USB7_P 20. COM1: (DB9 connector) Provide serial RS232/422/485 via standard DB9 male connector. Default is set to RS232, RS422/485 can be selected via BIOS. Pin 9 RI/5V/12V select via JP1.
  • Page 24 RS485 (option): Pin# Signal Name 485- 485+ BIOS Setup：Serial Port 1 Configuration【RS-485】 21. JP1: (2.0mm Pitch 2x3 Pin Header) For COM1 pin9 signal setting. JP1 Pin# Function Close 1-2 COM1 Pin9 RI (Ring Indicator, Default) Close 3-4 COM1 Pin9 = +5V Close 5-6 COM1 Pin9 = +12V 22.
  • Page 25 (2.0mm Pitch 2x5 Pin Header) Provide 2x2wired RS485(COM3/4). Signal Name Pin# Pin# Signal Name COM3_485- COM4_485- COM3_485+ COM4_485+ 25. GPIO2: (2.0mm Pitch 2x5 Pin Header) Provide 8xGPIO(4xDI,4xDO) with 5V VCC. Signal Name Pin# Pin# Signal Name 5V_GPIO GPIO_IN1 GPIO_IN2 GPIO_IN3 GPIO_IN4 GPIO_OUT1 GPIO_OUT2...
  • Page 26 Pin# Signal Name SIMVCC SIM_RST SIM_IO SIM_CLK 29. M2_B1: (M.2 B-Key Socket) Support 2242/2280 SATA III/PCIex1 interface SSD. 30. M2_E1: (M.2 E-Key Socket) Provide USB2.0/PCIex1, support E-key 2230 WiFi/BT expansion cards. Status LED is supported via WLAN1. 31. SATA1: (SATA 7Pin) SATA connector provide SATA III signal for storages. 32.

  • Page 27: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation, press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup Press F11 to load default values and continue 0085 3.2 BIOS SETUP UTILITY Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.

  • Page 28: Main Settings

    3.3 Main Settings System Time: Set the system time, the time format is: Hour : 0 to 23 Minute : 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Day: Note that the ‘Day’ automatically changes when you set the date.

  • Page 29: Advanced Settings

    3.4 Advanced Settings 3.4.1 CPU Configurations CPU Configuration Type Intel(R) Celeron(R) J6412 @ 2.00GHz 0x90661 Speed 2000 MHz L1 Data Cache 32 KB x 4 L1 Instruction Cache 32 KB x 4 L2 Cache 1536 KB x 4 L3 Cache 4 MB L4 Cache Supported...
  • Page 30 [Enabled] Intel (VNX) Virtualization Technology: [Disabled] [Enabled] PECI: [Disabled] [Enabled] Active Processor Cores: [ALL] BIST: [Disabled] [Enabled] AP threads Idle Manner: [HALT Loop] [MWAIT Loop] [RUN Loop] AES: [Disabled] [Enabled] MachineCheck: [Disabled] [Enabled] MonitorMWait: [Disabled] [Enabled] CPU SMM Enhancement CPU SMM Enhancement SMM Use Delay Indication: [Disabled] [Enabled]...
  • Page 31 CPU – Power Management Control CPU – Power Management Control P0 Fused Max Core Ratio P1 Fused Max Core Ratio P2 Fused Max Core Ratio P3 Fused Max Core Ratio Boot performance mode: [Max Battery] [Max Non-Turbo Performance] [Turbo Performance] Intel (R) Speed Step(tm): [Disabled] [Enabled]...
  • Page 32 Energy Efficient P-state: [Disabled] [Enabled] Package Power Limit MSR Lock: [Disabled] [Enabled] Power Limit 1 Override: [Disabled] [Enabled] Power Limit 2 Override: [Disabled] [Enabled] Power Limit 2 1-Core Ratio Limit Override 2-Core Ratio Limit Override 3-Core Ratio Limit Override 4-Core Ratio Limit Override Energy Efficient Turbo: [Disabled] [Enabled]...
  • Page 33 [Disabled] [Enabled] AC Loadline DC Loadline PS Current Threshold1 PS Current Threshold2 PS Current Threshold3 PS3 Enable: [Disabled] [Enabled] PS4 Enable: [Disabled] [Enabled] IMON Slope IMON Offset IMON Prefix VR Current Limit TDC Enable: [Disabled] [Enabled] TDC Current Limit TDC Time Window: [1 ms] [2 ms] [3 ms]...
  • Page 34 [Enabled] Power Limit 4 Override: [Disabled] [Enabled] C states: [Disabled] [Enabled] Enhanced C-states: [Disabled] [Enabled] C-state Auto Demotion [C1] C-state Un-demotion [C1] Package C-State Demotion: [Disabled] [Enabled] Package C-State Un-demotion: [Disabled] [Enabled] CState Pre-Wake: [Disabled] [Enabled] IO MWAIT Redirection: [Disabled] [Enabled] Package C State Limit [C3]...
  • Page 35 [Hash Vector] [No Change] Timed MWAIT: [Disabled] [Enabled] Custom P-state Table Custom P-state Table Number of P states EC Turbo Control Mode: [Disabled] [Enabled] Energy Performance Gain: [Disabled] [Enabled] EPG DIMM Idd3N EFG DIMM Idd3P Power Limit 3 Settings CPU Lock Configuration CFG Lock: [Disabled] [Enabled]...
  • Page 36 [1050Mhz] [1100Mhz] [1150Mhz] [1200Mhz] Disable Turbo GT frequency: [Enabled] [Disabled] 3.4.3 Thermal Configuration Thermal Configuration Enable All Thermal Funcations: [Disabled] [Enabled] CPU Thermal Configuration Cpu Thermal Configuration DTS SMM: [Disabled] [Enabled] [Critical Temp Reporting(Out of spec)] Tcc Activation Offset Tcc Offset Time Window: [Disabled] [5ms] [10 ms]...
  • Page 37 [40 sec] [48 sec] [56 sec] [64 sec] [80 sec] [96 sec] [112 sec] [128 sec] [160 sec] [192 sec] [224 sec] [256 sec] [320 sec] Tcc Offset Clamp Enable: [Disabled] [Enabled] Tcc Offset Lock Enable: [Disabled] [Enabled] Bi-directional PROCHOT#: [Disabled] [Enabled] Disable PROCHOT# Output:...
  • Page 38 [55 C] [63 C] [71 C] [79 C] [87 C] [95 C] [100 C] [103 C] [111 C] [119 C (POR)] [127 C] [130 C] Active Trip Point 0: [Disabled] [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C]...
  • Page 39 [Disabled] [15 C] [23 C] [31 C] [39 C] [47 C] [55 C] [63 C] [71 C] [79 C] [87 C] [95 C] [103 C] [111C] [119 C (POR)] Passive TC1 Value Passive TC2 Value Passive TSP Value Active Trip Points: [Disabled] [Enabled] Passive Trip Points:...
  • Page 40 Hardware Health Monitor Thermal Sensor 1 Temp 0.0 C Thermal Sensor 2 Temp 0.0 C Thermal Sensor 3 Temp 0.0 C Thermal Sensor 4 Temp 0.0 C CPU Fan Speed 0 rpm 3.4.4 Trusted Computing Configuration Security Device Support: [Disabled] [Enabled] NO Security Device Found 3.4.5...
  • Page 41 COM1 Config: [RS232 mode] [RS485 mode] [RS422 mode] Serial Port 2 Configuration Serial Port 2 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2F8h; IRQ=4; Change Settings: [Auto] [IO=2F8h; IRQ=4] [IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2F8h; IRQ=3,4,5,6,7,10,11,12;] [IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;] [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;] Serial Port 3 Configuration Serial Port 3 Configuration Serial Port: [Disabled]...
  • Page 42 Change Settings: [Auto] COM5 Config: [RS485 mode] [RS422 mode] Serial Port 6 Configuration Serial Port 6 Configuration Serial Port: [Disabled] [Enabled] Device Settings IO=2F0h; IRQ=4; Change Settings: [Auto] COM6 Config: [RS485 mode] [RS422 mode] 3.4.7 Hardware Monitor Pc Health Status System temperature1 : +39 C Fan1 Speed...

  • Page 43: Chipset Settings

    Temperature: 3.4.8 AMI Graphic Output Protocol Policy Intel® Graphics Controller Intel® GOP Driver [18.0.1034] Output Select: [EDP1] [DP1] Brightness Setting BIST Enable: [Disabled] [Enabled] 3.4.9 Network Stack Configuration Network Stack: [Disabled] [Enabled] 3.4.10 NVME Configuration NVMe Configuration No NVME Device Found Chipset Settings ACS-231xA User Manual...
  • Page 44 3.5.1 System Agent (SA) Configuration System Agent (SA) Configuration Memory Configuration Memory Thermal Configuration Memory Thermal Configuration Memory Power and Thermal Throttling Memory Power and Thermal Throttling DDR PowerDown and idle counter: [PCODE] [BIOS] FOR LPDDR Only: DDR PowerDown and Idle counter [PCODE] [BIOS]...
  • Page 45 Energy Scale Factor Idle Energy Ch0Dimm0 PowerDown Energy Ch0Dimm0 Activate Energy Ch0Dimm0 Read Energy Ch0Dimm0 Write Energy Ch0Dimm0 Idle Energy Ch0Dimm1 PowerDown Energy Ch0Dimm1 Activate Energy Ch0Dimm1 Read Energy Ch0Dimm1 Write Energy Ch0Dimm1 Idle Energy Ch1Dimm0 PowerDown Energy Ch1Dimm0 Activate Energy Ch1Dimm0 Read Energy Ch1Dimm0 Write Energy Ch1Dimm0 Idle Energy Ch1Dimm1...
  • Page 46 Warm Threshold Ch1 Dimm0 Warm Threshold Ch1 Dimm1 Hot Threshold Ch1 Dimm0 Hot Threshold Ch1 Dimm1 Thermal Throttle Budget Settings Warm Budget Ch0 Dimm0 Warm Budget Ch0 Dimm1 Hot Budget Ch0 Dimm0 Hot Budget Ch0 Dimm1 Warm Budget Ch1 Dimm0 Warm Budget Ch1 Dimm1 Hot Budget Ch1 Dimm0 Hot Budget Ch1 Dimm1...
  • Page 47 [Enabled] Early ReadMPR Timing Centering 2D: [Disabled] [Enabled] Read MPR Training: [Disabled] [Enabled] Receive Enable Training: [Disabled] [Enabled] Jedec Write Leveling: [Disabled] [Enabled] LPDDR4 Write DQ DQS Retraining: [Disabled] [Enabled] Early Write Time Centering 2D: [Disabled] [Enabled] Early Read Time Centering 2D: [Disabled] [Enabled] Write Timing Centering 1D:...
  • Page 48 [Disabled] [Enabled] Read Equalization Training*: [Disabled] [Enabled] Read Amplifier Training*: [Disabled] [Enabled] Write Timing Centering 2D: [Disabled] [Enabled] Read Timing Centering 2D: [Disabled] [Enabled] Command Voltage Centering: [Disabled] [Enabled] Write Voltage Centering 2D: [Disabled] [Enabled] Read Voltage Centering 2D: [Disabled] [Enabled] Late Command Training: [Disabled]...
  • Page 49 [Disabled] [Enabled] DIMM SPD Alias Test: [Disabled] [Enabled] Receive Enable Centering 1D: [Disabled] [Enabled] Retrain Margin Check: [Disabled] [Enabled] Write Drive Strength Up/ Dnindependently: [Disabled] [Enabled] Command Slew Rate Training: [Disabled] [Enabled] Command Drive Strength and Equalization: [Disabled] [Enabled] Command Normalization: [Disabled] [Enabled] Early DQ Write Drive Strength and...
  • Page 50 DQ DFE Training: [Disabled] [Enabled] Sense Amplifier Correction Training: [Disabled] [Enabled] Memory Configuration Memory RC Version 0.0.4.104 Memory Data Rate 3200 MTPS Memory Timings (tCL-tRCD-tRP-tRAS) 22-22-22-52 Channel 0 Slot 0 Populated / Disabled Channel 0 Slot 1 Populated / Disabled Channel 1 Slot 0 Populated &...
  • Page 51 [2400] [2600] [2667] [2800] [2933] [3000] [3200] [3467] [3600] [3733] [4000] [4200] [4267] HOB Buffer Size: [Auto] [1B] [1KB] [Max (assuming 63KB total HOB size)] Max TOLUD: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2 GB] [2.25 GB] [2.5 GB] SA GV: [Disabled]...
  • Page 52 [Disabled] [Enabled] REFRESH_PANIC_WM: REFRESH_HP_WM: Exit On Failure (MRC): [Disabled] [Enabled] Enable/Disable IED (Intel Enhanced Debug): [Enabled] [Disabled] Ch Hash Support: [Disabled] [Enabled] Ch Hash Mask: 12492 Ch Hash Interleaved Bit: [BIT6] [BIT7] [BIT8] [BIT9] [BIT10] [BIT11] [BIT12] [BIT13] Extended Bank Hashing: [Disabled] [Enabled] Per Bank Refresh:...
  • Page 53 [Disable DIMM1] [Disable both DIMMs] Channel 1 DIMM Control: [Enable both DIMMs] [Disable DIMM0] [Disable DIMM1] [Disable both DIMMs] Force Single Rank: [Disabled] [Enabled] Force Single Sub Channel: [Disabled] [Enabled] MRC TASK Debug Print Enable: Memory Remap: [Enabled] [Disabled] Time Measure: [Disabled] [Enabled] DLL Weak Lock Support:...
  • Page 54 [Disabled] [Enabled] Memory Test on Warm Boot: [Disabled] [Enabled] Graphics Configuration Graphics Configuration Primary Display: [Auto] [IGFX] [PEG] [PCI] External Gfx Card Primary Display Configuration External Gfx Card Primary Display Configuration Primary PCIE: [Auto] [PCIE 1] [PCIE 2] [PCIE 3] [PCIE 4] [PCIE 5] [PCIE 6]...
  • Page 55 [128 MB] [256 MB] [512 MB] [1024 MB] [2048 MB] PSMI SUPPORT: [Disabled] [Enabled] DVMT- Pre-Allocated: [0M] [32M] [64M] [96M] [128M] [160M] [4M] [8M] [12M [16M] [20M] [24M] [28M] [32M/F7] [36M] [40M] [44M] [48M] [52M] [56M] [60M] DVMT Total Gfx Mem: [128M] [256M] [MAX]...
  • Page 56 [Disabled] [Enabled] Configure GT for use: [Enabled] [Disabled] PAVP Enable: [Enabled] [Disabled] Cdynmax Clamping Enable: [Enabled] [Disabled] Cd Clock Frequency: [172.8 Mhz] [307.2 Mhz] [556.8 Mhz] [652.8 Mhz] [Max CdClock freq based on Reference C1k] Skip Full CD Clock Init: [Enabled] [Disabled] VBT Select:...
  • Page 57 DMI Link ASPM Control: [Disabled] [L0s] [L1] [L0sL1] [Auto] PCIE Port assigned to LAN Disabled Port8xh Decode: [Disabled] [Enabled] Peer Memory write Enable: [Disabled] [Enabled] Compliance Test Mode: [Disabled] [Enabled] PCH PCI Express Clock Gating: [Platform-POR] [Enabled] [Disabled] PCIe function swap: [Disabled] [Enabled] PCIe EQ settings...
  • Page 58 [Enabled] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed:...
  • Page 59 [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options Detect Non-Compliance Device: [Disabled] [Enabled]...
  • Page 60 [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug:...
  • Page 61 [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock:...
  • Page 62 ASPM: [Disabled] [L0s] [L1] [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled]...
  • Page 63 [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual]...
  • Page 64 PCIe Express Root Port 4: [Disabled] [Enabled] Connection Type: [Built - in] [Slot] ASPM: [Disabled] [L0s] [L1] [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled]...
  • Page 65 [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override:...
  • Page 66 Alignment: Prefetchable Memory Alignment: USB/SATA/UFS PCI Express Root Port 5 PCI Express Root Port 5: [Disabled] [Enabled] Connection Type: [Built-in] [Slot] ASPM: [Disabled] [L0s] [L1] [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] Multi-VC: [Disabled] [Enabled] VC to TC Mapping TC0: TC1:...
  • Page 67 TC7: [VC0] [VC1] PTM: [Disabled] [Enabled] DPC: [Disabled] [Enabled] EDPC: [Disabled] [Enabled] URR: [Disabled] [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled]...
  • Page 68 Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout: Extra Bus Reserved: Reserved Memory: Reserved I/O: PCH PCIe LTR Configuration LTR: [Disabled] [Enabled] Snoop Latency Override: [Disabled] [Manual] [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options...
  • Page 69 [L1] [L0sL1] [Auto] L1 Substates: [Disabled] [L1.1] [L1.1 & L1.2] ACS: [Disabled] [Enabled] Multi-VC: [Disabled] [Enabled] VC to TC Mapping TC0: TC1: [VC0] [VC1] TC2: [VC0] [VC1] TC3: [VC0] [VC1] TC4: [VC0] [VC1] TC5: [VC0] [VC1] TC6: [VC0] [VC1] TC7: [VC0] [VC1] PTM:...
  • Page 70 [Enabled] FER: [Disabled] [Enabled] NFER: [Disabled] [Enabled] CER: [Disabled] [Enabled] SEFE: [Disabled] [Enabled] SENFE: [Disabled] [Enabled] SECE: [Disabled] [Enabled] PME SCI: [Disabled] [Enabled] Hot Plug: [Disabled] [Enabled] Advanced Error Reporting: [Disabled] [Enabled] PCIe Speed: [Auto] [Gen1] [Gen2] [Gen3] Transmitter Half Swing: [Disabled] [Enabled] Detect Timeout:...
  • Page 71 [Auto] Non Snoop Latency Override: [Disabled] [Manual] [Auto] Force LTR Override: [Disabled] [Enabled] LTR Lock: [Disabled] [Enabled] Extra options Detect Non-Compliance Device: [Disabled] [Enabled] Prefetchable Memory: Reserved Memory Alignment: Prefetchable Memory Alignment: PCIE clocks Clock0 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock0: [Platform-POR] [Disabled] Clock1 assignment:...
  • Page 72 ClkReq for Clock3: [Platform-POR] [Disabled] Clock4 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock4: [Platform-POR] [Disabled] Clock5 assignment: [Platform-POR] [Enabled] [Disabled] ClkReq for Clock5: [Platform-POR] [Disabled] SATA Configuration SATA Configuration SATA Controller(s): [Enabled] [Disabled] SATA Mode Selection: AHCI SATA Ports Multiplier: [Enabled] [Disabled] SATA Test Mode:...
  • Page 73 [Disabled] [Enabled] Configured as eSATA Hot Plug supported External: [Disabled] [Enabled] Spin Up Device: [Disabled] [Enabled] SATA Device Type: [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 0 DevSlp: [Disabled] [Enabled] SATA Port 0 RxPolarity: [Disabled] [Enabled] DITO Configuration:...
  • Page 74 [Hard Disk Drive] [Solid State Drive] Topology: [Unknown] [ISATA] [Direct Connect] [Flex] [M2] SATA Port 1 DevSlp: [Disabled] [Enabled] SATA Port 1 RxPolarity: [Disabled] [Enabled] DITO Configuration: [Disabled] [Enabled] DITO Value DM Value Serial ATA Port 2 Empty Software Preserve unknown Port 2: [Disabled]...
  • Page 75 SATA Port 2 RxPolarity: [Disabled] [Enabled] DITO Configuration: [Disabled] [Enabled] DITO Value DM Value USB Configuration USB Configuration XHCI Compliance Mode: [Disabled] [Enabled] xDCI Support: [Disabled] [Enabled] USB2 PHY Sus Well Power Gating: [Disabled] [Enabled] USB3 Link Speed Selection: [GEN1] [GEN2] USB PDO Programming: [Disabled]...
  • Page 76 eMMC 5.1 Controller: [Disabled] [Enabled] eMMC 5.1 HS400 Mode: [Disabled] [Enabled] Enable HS400 software tuning: [Disabled] [Enabled] Enable HS400 software tuning: [33 0hm] [40 0hm] [50 0hm] SDCard 3.0 Controller: [Disabled] [Enabled] ACS-231xA User Manual...

  • Page 77: Security Settings

    Security Settings 3.6.1 Administrator Password 3.6.2 User Password ACS-231xA User Manual...

  • Page 78: Boot Settings

    Boot Settings Setup Prompt Timeout Bootup Numlock State: [On] [off] Quiet Boot: [Disabled] [Enabled] Fast Boot: [Disabled] [Enabled] ACS-231xA User Manual...

  • Page 79: Save & Exit Settings

    Save & Exit Settings Save Changes and Exit Save & Exit Setup save Configuration and exit ? [Yes] [No] Discard Changes and Exit Exit Without Saving Quit without saving? [Yes] [No] Save Changes and Reset Reset the system after Saving The changes? [Yes] [No] Discard Changes and Reset...
  • Page 80 [Yes] [No] Restore Defaults Restore /Load Defaults values for all the setup options? [Yes] [No] Save as user Defaults Save the changes done so far as User Defaults? [Yes] [No] Restore user Defaults Restore the User Defaults to all the setup options? [Yes] [No] ACS-231xA User Manual...

  • Page 81: Chapter 4 Installation Of Drivers

    Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows 10/11. The software and drivers are included with the motherboard. The contents include Intel chipset driver, Graphics driver, Audio driver, Network Connection and Management Engine Components, install instructions are given below.

  • Page 82: Intel® Chipset

    4.1 Intel® Chipset To install the Intel chipset driver, please follow the steps below. Step 1. Here is welcome page. Please make sure you save and exit all programs before install. Click Next. Step 2. Read the license agreement. Click Accept to accept all of the terms of the license agreement.
  • Page 83 Step 3. Click Install to begin the installation. Step 5. Click Restart now to exit the wizard and restart computer. ACS-231xA User Manual...

  • Page 84: Intel Graphics Driver Installer

    4.2 Intel Graphics Driver Installer To install the Intel® Graphics Driver, please follow the steps below. Step 1. Here is the welcome page, press Begin Installation to start install procedures. Step 2. Scroll down to read the license agreement. ACS-231xA User Manual...
  • Page 85 Step 3. Read the license agreement. Click I agree to accept all the terms of the license agreement. Step 4. Click Start to install the components. ACS-231xA User Manual...
  • Page 86 Step 5. Click Finish to finish installation. ACS-231xA User Manual...

  • Page 87: Realtek High Definition Audio Driver

    4.3 Realtek High Definition Audio Driver To install the Realtek High Definition Audio Driver, please follow the steps below. Step 1. Here is the welcome page, click Next to continue. Step 2. Choose Yes, I want to restart my computer now. Click Finish to complete the installation.

  • Page 88: Intel® Network Connection

    4.4 Intel® Network Connection To install the Intel® Network Connection, please follow the steps below. Step 1. Here is the Wired_Driver_27.8_x64 Win Zip file, click Cancel to continue. Step 2. Click OK to continue the installation of Intel® Network Connection. Step 4.

  • Page 89: Intel® Management Engine Components

    4.5 Intel® Management Engine Components To install the Intel® Management Engine Components, please follow the steps below. Step 1. Here is the welcome page, click Next to continue. Step 2. Read the license agreement. Click Accept to accept all the terms of the license agreement.
  • Page 90 Step 3. Choose a location to store the files and click Next to continue installation. Step 4. Click Finish to finish installation. ACS-231xA User Manual...

This manual is also suitable for:

Acs-2310aAcs-2311a

Table of Contents