Wren Kitchens LINEA Tower Unit Fittings Manual page 2

Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damage. Any
un-needed cardboard or plastic should be flattened down and placed in the bin.
A minimum of two people will be needed to lift the unit.
Removing the frontal
Before installing the unit, remove the frontal
by pulling the release catch.
Place the frontal in the door safe along its
longest length.
Removing the lift up frontal
Remove the lift up frontal by un-clipping
the lift hinge mechanisms from each of the
brackets.
Then pull the release catch on the hinges at
the top of the unit and place the frontal into
the door safe along its longest length.
Removing the fittings
Remove all content so the unit is empty.
All fittings should be kept on a clean and level
surface and the shelves placed in the door
safe along their longest lengths.
Page 2