Related Manuals for Wren Kitchens Vogue TOWER UNIT 600 2 Door Fridge / Freezer
Summary of Contents for Wren Kitchens Vogue TOWER UNIT 600 2 Door Fridge / Freezer
- Page 1 TOWER UNIT 600 2 Door Fridge / Freezer Assembly Guide 2070 x 600 2070 x 600 50/50 70/30 2250 x 600 Tall 2250 x 600 Tall 50/50 70/30 For Internal Use: FI.WR.INS.041_WKIN00141_TOWER_600_2DrFridgeFreezer.Rev8...
- Page 2 TOWER UNIT 600 2 Door Fridge / Freezer Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED 70/30 OPTION 50/50 OPTION Panel B Panel C Panel E Legs Frontal (packed separately) Appliance Shelf...
- Page 3 Step 2. Step 1. Seat (G) Seat cam dowel (G) into Seat dowel (F) into holes in Cam Dowel holes in both end panels (B) both end panels (B) as shown. into hole as as shown. shown. Step 3. G F F Attach panels (C) and (E) to panels (B), using cam DOWEL (F) dowel (G) and also using Dowels (F) (in orange)
- Page 4 TOWER UNIT 600 2 Door Fridge / Freezer Assembly Guide Step 5. Front Position legs as shown. Ensure legs are rotated to also provide support to the end panels (B). Step 6. Secure each of the legs into place with 4 x 15mm screws (L) per leg.
- Page 5 Step 8. N.B. Attach hinge plates onto end panels For appliance shelf, secure to panel (B) using (B) to suit as shown using 2 x screws 4 x brackets SML (FF) locate according to already located in hinge plates. customer appliance requirements. Hinge side or sides to be mounted in accordance to Customer Specific Kitchen Plan.
- Page 6 TOWER UNIT 600 2 Door Fridge / Freezer Assembly Guide N.B. Step 8. For appliance shelf, secure to panel (B) using Attach hinge plates onto end panels (B) to suit 4 x brackets SML (FF) locate according to as shown using 2 x screws already located in customer appliance requirements.
- Page 7 Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Screw into any side units using the 30mm screws (K) provided to secure to unit. Screw just to the rear of the hinge mounting plates, at the top and bottom of both sides of the unit, place cover caps (M) on the head to conceal it.
- Page 8 TOWER UNIT 600 2 Door Fridge / Freezer Assembly Guide See Customer Specific Kitchen Plan For Tower Frontals Step 9. Insert hinge where required in holes as shown. Step 10. Secure hinges by tightening 2 x screws with hinge dowels attached.
Need help?
Do you have a question about the Vogue TOWER UNIT 600 2 Door Fridge / Freezer and is the answer not in the manual?
Questions and answers