Knx standard push-button module with integrated bcu, standard push-button module with integrated bcu, 1/2/4-gang, standard push-button module with bcu, 3-gang (5 pages)
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set Safety instructions Serious injuries, fire or property damage are possible. Read the instructions in full, observe them and keep them for future reference. This device or its accessories are supplied with batteries in the form of button cells. DANGER! Batteries can be swallowed.
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set Radio module in mounting ring Status LED QR code Retaining screw Rockers Status LED (5) LED flashes Pairing mode active / identifying device LED lights up for 3 seconds Confirmation after restart of the radio module LED blinks quickly Reset initiated...
Page 5
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set – Rockers (8) are not installed so that the status LED (5) and QR code (6) are visible The radio module (4) is put into operation with its individual QR code (6), see radio module or attached primary code card.
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set – Prerequisite: The radio module belongs to a network. ■ Open the app of the smart home system. ■ Activate the radio module for identification. The status LED (5) flashes as an acknowledgement. ■...
Page 7
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set ■ Align the adhesive pad, stick it to the surface and smooth it out. Remove air bubbles. Figure 3: Cutting the adhesive pads for multiple combinations Figure 4: Adhesive pad, front Do not remove the central white area (DO NOT REMOVE), as this will make dismounting more difficult.
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set Replacing the battery Observe the safety instructions for the batteries. Keep contacts of batteries and device free of grease. Figure 5: Dismounting the radio module ■ In the case of an installed device, carefully remove the rockers (8) from the ra- dio module (4) (see figure 5).
Page 9
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set ■ Unlock the battery compartment cover (10) on the rear of the radio module with a flat-blade screwdriver by pressing on the tab (9) and sliding it forwards (see figure 6). ■...
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set ■ Slide the battery compartment cover (10) into the battery compartment (13) in the correct orientation until the tab (9) engages (see figure 8). The battery is pushed into the battery holder and the battery compartment is locked.
3 years Declaration of conformity Albrecht Jung GmbH & Co. KG hereby declares that the radio system type art. no. MAT..95.., MATS..95.. meets the directive 2014/53/EU. You can find the full article number on the device. The complete text of the EU Declaration of Conformity is available on the Internet at: www.jung.de/ce...
Matter push-button 2-gang, battery-powered, Matter push-button 2-gang, battery-powered, set Warranty The warranty is provided by the specialist trade in accordance with statutory require- ments. ALBRECHT JUNG GMBH & CO. KG Volmestraße 1 58579 Schalksmühle GERMANY Telefon: +49 2355 806-0 Telefax: +49 2355 806-204 kundencenter@jung.de...
Need help?
Do you have a question about the MAT 95 Series and is the answer not in the manual?
Questions and answers