ADF Web HD67C07-B2 User Manual page 29

Industrial Electronic Devices
Warning:
If the update fails, try these points before seeking assistance:
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
Check the LAN settings;
If you are using the program inside a Virtual Machine, try to use in the main Operating System;
If you are using Windows Seven, Vista, 8, 10 or 11 make sure that you have the administrator privileges;
In case you have to program more than one device, using the "UDP Update", you have to cancel the ARP table every time you
connect a new device on Ethernet. For do this you have to launch the "Command Prompt" and write the command "arp -d". Pay
attention that with Windows Vista, Seven, 8, 10, 11 you have to launch the "Command Prompt" with Administrator Rights;
Pay attention at Firewall lock.
Warning:
In the case of HD67C07 you have to use the software "SW67C07": www.adfweb.com\download\filefold\SW67C07.zip.
ADFweb.com S.r.l.
User Manual Modbus TCP Slave / MQTT Broker
Document code: MN67C07_ENG Revision 1.000 Page 29 of 37