ADF Web HD67C07-B2 User Manual page 17

Industrial Electronic Devices
SET COMMUNICATION:
By Pressing the "Set Communication" button from the main window for SW67C07 (Fig. 2) the
window "Set Communication" appears (Fig. 3).
This window is divided in two sections, one for configuring the MQTT network and the other for the
Modbus TCP network.
MQTT Broker section
MQTT B  S P
ROKER ELECT RODUCT
This section is used to select the product in use. It is possible to have:
HD67C07-B2;
HD67C07-G43-B2;
HD67C07-G43-E-B2;
HD67C07-G43-VPN-B2;
HD67C07-G43-E-VPN-B2.
MQTT B  E I
ROKER THERNET NTERFACES
This section is used to define the general parameters of Ethernet. The means of the fields are:
In the field "Interfaces
Ethernet interfaces. For the hardware version with a single Ethernet port, it is mandatory to
set "Single Ethernet Interface";
In the field "Enable DHCP", it is possible to enable the DHCP Client to obtain automatically
the IP Address from a DHCP Server in the network;
If "Enable DHCP" option is active, it is possible to configure the
o
and "Default SubNet
present;
If "Enable DHCP" option is active, it is possible to configure the
o
Ethernet interface of the converter;
ADFweb.com S.r.l.
C :
ODE
:
Configuration", it is possible to define the hardware settings of the
Mask" to set a static IP Address if a DHCP Server is not
User Manual Modbus TCP Slave / MQTT Broker
Document code: MN67C07_ENG
"Default IP Address"
"Host Name" for the
Figure 3a: "Set Communication
Revision 1.000 Page 17 of 37
 MQTT Broker" window