ADF Web HD67C07-B2 User Manual page 22

Industrial Electronic Devices
SET MQTT BROKER:
By Pressing the "Set MQTT Broker" button from the main window for SW67C07 (Fig. 2) the window "MQTT Broker" appears (Fig. 4).
This section is used to define the list of the MQTT Clients that can connect to the broker and the list of accepted/denied topics.
Figure 4: "MQTT Broker" window
In the first table, it is possible to add, modify and delete the MQTT Clients by clicking on "Add", "Modify" and "Delete buttons". The means of
the fields are:
If the field "Enable" is checked, the MQTT Client is enabled;
In the field "User" the username of the MQTT Client is defined;
In the field "Password" the password of the MQTT Client is defined;
In the field "Mnemonic" a description for the MQTT Client is defined.
ADFweb.com S.r.l.
User Manual Modbus TCP Slave / MQTT Broker
Document code: MN67C07_ENG Revision 1.000 Page 22 of 37