Advertisement
User Manual Modbus TCP Slave / MQTT Broker
Document code: MN67C07_ENG
Revision 1.000
Page 11 of 37
Industrial Electronic Devices
RECOVERY BUTTON:
In order to recover the device in case of wrong firmware updating or any error that compromises correct functioning of the device, it is
necessary to press the BTN1. After pressing, the device will be switched in Recovery Mode and it will be possible to update again the
firmware or reset the device using the default IP address 192.168.2.206 via webserver.
ADFweb.com S.r.l.
Advertisement
Need help?
Do you have a question about the HD67C07-B2 and is the answer not in the manual?
Questions and answers