ADF Web HD67C07-B2 User Manual page 20

Industrial Electronic Devices
Modbus TCP Slave section
M TCP S  E
ODBUS LAVE THERNET
This section is used to define the general parameters of Ethernet. The means of the
fields are:
In the field "Device Name
converter is defined;
If the field "Obtain an IP Address Automatically (DHCP for Cable
Connection)" is checked, DHCP for LAN connection is enabled;
If the field "Obtain an IP Address Automatically (DHCP for Wi-Fi
Connection)" is checked, DHCP for Wi-Fi connection is enabled;
If the field "Enable DNS" is checked, DNS protocol is enabled;
In the field "Primary
defined;
In the field "Secondary
defined.
M TCP S  M
ODBUS LAVE ODBUS
This section is used to define the general parameters of Modbus TCP side. The
means of the fields are:
In the field "IP ADDRESS" the IP address of Modbus TCP side of the
converter is defined;
In the field "SUBNET
converter is defined;
In the field "GATEWAY" the default gateway of the network is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
ADFweb.com S.r.l.
C :
ONNECTION
(Hostname)" the Hostname to assign to the
DNS" the IP Address of the primary DNS server is
DNS" the IP Address of the secondary DNS server is
TCP S :
LAVE
Mask" the Subnet Mask of Modbus TCP side of the
User Manual Modbus TCP Slave / MQTT Broker
Document code: MN67C07_ENG
Figure 3b: "Set Communication
Revision 1.000 Page 20 of 37
 Modbus TCP Slave" window