Delete Pop Message - Oki OF5750 Options Manual

LAN Print T.O.
User Function 82
It is impossible to judge whether printing data is not being
transmitted due to network delay or the end of the data
stream. This time-out configuration allows the device to
cancel a print job when no printing data can be found after
a specified time has elapsed since the last data was
submitted.
Do not change the default configuration unless it is
absolutely necessary.
Settings are: 5 sec., 30 sec., 5 min.
Default Setting is: 30 sec.
POP Interval
User Function 83
Use this to set the interval between POP receptions.
If the interval is set to 0, no automatic receptions occur. All
receptions are generated manually.
Available settings are 0 to 60 minutes, adjustable by the
minute.
The default setting is 5 minutes.

Delete POP Message

User Function 84
Use this to determine how the received e-mails are deleted
from the mail server.
If this user function is set to OFF, received e-mails remain on
the POP server until the Network Administrator deletes them.
Available settings are:
OFF: Do not delete mail
TYPE1: Delete only the mail your fax machine can print
TYPE2: Delete all mail
The default setting is Type 2.
T.37 Option Guide: English
|
27