Sending To A Non-Programmed E-Mail - Oki OF5750 Options Manual

Entry methods are:
One-Touch
Search
You must know the first letter of the e-mail address
to search for an e-mail address.
Non-programmed e-mail
also known as a Numeric Keypad or walk-up
You must send the document as an Internet
Transmission.
See the following section ("Sending to a Non-
Programmed E-mail") for more information.
3 Press Start.
4 The machine scans the document and stores the
document's image data into memory.
5 Next, the machine establishes a server connection.
"Sending" appears on the display when the server
connection is established.
6 At the end of the transmission, the result shows on the
display and a buzzer sounds.
|
50 OKIFAX 5750/5950

Sending to a Non-Programmed E-mail

Also known as Numeric Keypad (Walk-up) e-mail faxing
If you want to send an Internet Fax, but you do not want to
program the e-mail address as a One-Touch, you must make
sure that it is sent as an Internet Transmission.
1 Load the document.
2 Press the e-mail key.
3 Input the e-mail address.
!
One-Touch Key 32 is the @ symbol.
Use One-Touch Key 31 (Caps) to switch between
upper and lowercase letters.
4 Press Start.