Using Okiview 32 - Oki OF5750 Options Manual

Using OKIVIEW 32

Use this tool to configure the Network Card on
Windows95/98/NT4.0 via the network.
The settings available through OKIVIEW 32 are nearly the
same as those accessible through the Web page.
!
The Web page you access for your fax machine is
slightly different from the Web page described in the
OKILAN 7100e+ User's Guide.
See the OKILAN 7100e+ User's Guide, "OKILAN
Configuration, Setting Up the OKILAN 7100e+ Using
OKIVIEW 32" or the OKIVIEW 32 on-line Help.
The differences are explained in this section.
The OKILAN 7100e+ User's Guide contains detailed
information about these settings. There are differences
between the settings you will see for the Internet Fax Web
page and the page described in the OKILAN 7100e+ User's
Guide.
This section explains the information choices (tabs) within
OKIVIEW 32 and the differences in settings you will
encounter.
When you start OKIVIEW 32, you will see a list of the
Network Cards connected to the printers and facsimiles.
Check the MAC addresses of the printers and facsimiles to
identify the Network Card you want to configure.
!
The Network Card Report provides the MAC address as
explained earlier.
Next, select the Network Card you wish to configure.
Then go to MENU, then Setup, then Device Setup.
You can change the following settings.
General
TCP/IP
Enable DHCP/BOOTP or RARP
IP Address, Subnet mask and Default Gateway
Enable Banner for FTP/LPR
DNS settings
NetWare
EtherTalk
NetBEUI
SNMP
Internet Fax
T.37 Option Guide: English
|
45