Direct Transmission - Panasonic UF-6300 Operating Instructions Manual

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
Without stroing image into memory, follow the steps below.
1
2
3
1
4
Enter the telephone number from the keypad.
Ex: 5 5 5 1 2 3 4
5
Your machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first and then press
NOTE
Redial/Pause
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
dialling the digit "/".
Ex: 9 PAUSE * 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press
the printout mode setting of the Communication Journal.
Set document(s) face down.
8 9
to enter a pause (represented by a "-") before dialling the full number.
(represented by a "/"). The dialling method will be changed from Pulse to Tone after
1
to stop the transmission. The Communication Journal will not print out regardless of
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
PRESS START TO DIAL
5551234
* DIALLING *
5551234
Sto p .
00%
57