NSD ABSOCODER NPG-220HZCLC Specifications & Instruction Manual page 41

● Other error contents
Error contents
Pulse is not
The wiring of the I/O connector has problems.
output.
The pulse division of the function selector switch is improper.
The pulse width of the function selector switch is improper.
(Up/down pulse)
Incorrect pulse The sensor travel direction setting of the function selector
output. switch is improper.
The pulse output format setting of the function selector switch
is improper.
The wiring of the I/O connector has problems.
Probable cause
35
Error cancel procedures
Repair the wiring.
Set the correct pulse division.
Set the correct pulse width.
Set the correct travel direction.
Set the correct pulse output setting.
Repair the wiring.