ST STM32WBA65I-DK1 User Manual page 6

5 Safety recommendations
5.1 Targeted audience
This product targets users with at least basic electronics or embedded software development knowledge like
engineers, technicians, or students.
This board is not a toy and is not suited for use by children.
5.2 Handling the board
This product contains a bare printed circuit board and as with all products of this type, the user must be careful
about the following points:
• The connection pins on the board might be sharp. Be careful when handling the board to avoid hurting
yourself
• This board contains static‑sensitive devices. To avoid damaging it, handle the board in an ESD‑proof
environment.
• While powered, do not touch the electric connections on the board with your fingers or anything conductive.
The board operates at voltage levels that are not dangerous, but components might be damaged when
shorted.
• Do not put any liquid on the board. Avoid operating the board close to water or at a high humidity level.
• Do not operate the board if dirty or dusty.
UM3462 - Rev 1
UM3462
Safety recommendations
page 6/43