ST STM32WBA65I-DK1 User Manual page 2

1 Features
• Ultra‑low‑power wireless STM32WBA65RIV7 microcontroller based on the Arm
featuring 2 Mbytes of flash memory and 512 Kbytes of SRAM in a VFQFPN68 package
• MCU RF board (MB2130):
– 2.4 GHz RF transceiver supporting Bluetooth
– Bluetooth
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
– Arm
– Integrated PCB antenna
• One digital microphone
• OLED display
• Three user LEDs
• User joystick with 4-direction control and selector button
• Reset push button
• Board connectors:
– ARDUINO
– Grove
– USB Type-C
– Battery
– Two 3.5 mm stereo jack sockets for input and output with microphone
– MIPI10
– Tag‑Connect
• Flexible power-supply options: ST-LINK USB V
• On-board STLINK-V3EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
Note: Arm and TrustZone are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3462 - Rev 1
®
LE:
LE 2M
LE Coded
Direction‑finding
LE Power control
Isochronous channels
Extended advertising
Periodic advertising
LE Secure connections
LE Audio
Mesh networking
Core specification v6.0
® ® ‑M33 CPU with Arm
Cortex
®
Uno V3 expansion connector
®
™
10‑pin footprint
®
, MDK-ARM, and STM32CubeIDE
®
LE
® ®
TrustZone , MPU, DSP, and FPU
or external sources
BUS
UM3462
Features
‑M33 core,
® ®
Cortex
STM32CubeWBA MCU Package
page 2/43