Compaq CL380 - ProLiant - 256 MB RAM Software User's Manual page 47

15. The Product Selection window appears. Follow the guided installation
process. If you need help, refer to the online help by clicking on the
Help button.
16. Once NetWare has been loaded, enter
at the NetWare System Console prompt. This allows you to set
NWCONFIG
up the NetWare disk partitions and to create or modify the volumes that
the system will use.
17. After the operating system has been successfully installed on both server
nodes, install the appropriate Novell clustering software.
System Setup and Configuration for Novell NetWare 3-5
LOAD INSTALL
(for NetWare 4.2) or