Icons representing the Shared Storage RAID controllers are arranged just
below the physical drives. The utility uses icons to indicate the status of your
controllers, as shown in Table 4-6.
Controller Status Icon
Configuration Procedures
Adding a Controller
A second CR3500 controller can be added for redundancy of the shared
storage array. To install a second controller, refer to the
Compaq ProLiant CL380 User Guide.
Configuring the CR3500 Controller
Each installed controller has configuration properties that can be modified
using the CR3500 Configuration Utility. When the controllers are installed, the
utility assigns default settings to them. You can change these settings to meet
your own needs.
To access the controller properties, right click the controller icon and select
Properties. You also can select the controller and then choose Properties from
the File pull-down menu.
Table 4-6
Controller status
Description
Indicates an operational controller
Indicates a controller that is not operational
CR3500 Configuration Utility 4-13