4-12 Compaq ProLiant CL380 Software User Guide
Physical Drives Window
The Physical Drives window (Figure 4-9) provides detailed information about
the physical drives you have configured in your storage subsystem.
Figure 4-9. Physical Drives window
The CR3500 Configuration Utility uses icons to indicate the status of the disks
in the disk window. The physical drive states and corresponding icons are
shown in Table 4-5.
Drive State Icon
Good
Reconstructing
Spare
Failed
Available
Table 4-5
Physical Drive States
State
Physical drive is operating normally as part of a
logical drive.
Reconstruction data is being written to this
physical drive.
Physical drive is available to replace a failed
physical drive that is a group member.
Physical drive is not available but is installed.
Physical drive is available for use in a logical
drive or as a spare.
Description