Using Computer Setup (F10) Utilities; Computer Setup-Main - HP 510B - Minitower PC Maintenance And Service Manual

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system.
To access the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press
Computer Setup.
NOTE:
again press
3. The Computer Setup Utility screen is divided into menu headings and actions.
Five menu headings appear on the Computer Setup Utility screen:
●
Main
●
Advanced
●
Power
●
Boot
● Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen,
press Esc.
CAUTION:
(F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only
after exiting the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table A-6 Computer Setup—Main
Option
System Time
System Date
Language
Floppy Diskette A:
If you do not press F10
F10 when the monitor light turns green to access the utility.
Do NOT turn the computer power OFF while the ROM is saving the Computer Setup
Description
Allows you to set system time.
Allows you to set system date.
Allows you to select language.
Allows you to set drive A to:
●
Disabled
● 1.44 MB 3.5"
● Not Installed
F10 when the monitor light turns green to enter
at the appropriate time, you must restart the computer and
Model 505B/515B — Computer Setup (F10) Utilities
59