Computer Setup—Boot
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table A-4
Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
ESC: Boot Menu
F9: Diagnostics
F10: Setup
F11: Recovery
F12: Boot from LAN
Boot Device Priority
CD-ROM Group Boot
Priority
Hard Drive Group
Boot Priority
Floppy Group Boot
Priority
Network Group Boot
Priority
Description
Disables/enables POST diagnostic messages display.
Enables/disables the ability to press the
Enables/disables the ability to press the
Enables/disables the ability to press the
Enables/disables the ability to press the
Enables/disables the ability to press the
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
1st Boot Device
●
2nd Boot Device
●
3rd Boot Device
●
4th Boot Device
Options for each boot device include:
●
CD-ROM Group
●
Hard Drive Group
●
Floppy Group
Network Boot Group
NOTE:
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating
system has started.
Specifies boot device priority within CD/DVD drives.
Specifies boot device priority within hard drives.
Specifies boot device priority within removable devices.
Specifies boot device priority within bootable network devices.
Model 500B/510B — Computer Setup (F10) Utilities
Esc
key to access the boot menu during boot.
F9
key to access the Diagnostics menu during boo.
F10
key to access the Setup menu during boo.
F11
key to access the recovery menu during boo.
F12
key to boot from LAN.
57