Table of Contents
Advertisement
16.
Replace the bracket cover on the back of the computer.
Figure 2-23
17.
Replace the screw to secure the bracket to the back of the computer.
Figure 2-24
18.
Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
19.
Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.
20
Chapter 2 Removal and Replacement Procedures Microtower (MT) Chassis
Replacing the bracket cover
Replacing the bracket screw
- Quick Links:
- Ddr3-Sdram Dimms
- System Board
Hide quick links:
Advertisement
Table of Contents
