Computer Setup-Power; Computer Setup-Boot - HP Elite 7000 - Microtower PC Maintenance And Service Manual

Table 3-2 Computer Setup—Advanced (continued)
F11:Recovery
F12:Boot from LAN
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-3 Computer Setup—Power
Option
After AC Power Failure Allows you to select system restart behavior after power loss:
Hyper-Threading
XD(Execute Disable)
Virtualization
Technology
WOL from S5
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3-4 Computer Setup—Boot
Option
Boot-time Diagnostic
Screen
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Floppy Group Boot
Priority
Allows you to enable/disable the option to press the
computer startup.
Allows you to enable/disable the option to press the
during computer startup.
Description
●
Stay Off
●
Power On
●
Auto
Allows you to enable/disable hyperthreading.
Disables/enables XD bit.
Allows you to enable/disable Virtualization Technology.
Allows you to enable/disable Limited (normal shutdown) WOL from S5 support.
Description
Disables/enables POST diagnostic messages display.
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●
Floppy Group
●
CD-ROM Group
●
Hard Drive Group
●
Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Specifies boot device priority within removable devices.
NOTE: This computer does not support floppy drives.
F11 key to access the Recovery menu during
F12 key to access the Boot from LAN option
Computer Setup (F10) Utilities 11