Pci Irq Assignment Screen; Serial Communication Screen - Dell PowerEdge T710 Hardware Owner's Manual

Option
Embedded Video
Controller (Enabled
default)

PCI IRQ Assignment Screen

Option
<PCIe device>

Serial Communication Screen

Option
Serial Communication
(On without Console
Redirection default)
Serial Port Address
External Serial Connector
(Remote Access Device
default)
Failsafe Baud Rate
(115200 default)
Remote Terminal Type
(VT100/VT220 default)
Redirection After Boot
(Enabled default)
Description
Enables or disables BIOS support for the integrated video
controller.
NOTE:
This field can be disabled only if an add-in video
card is present. If this field is disabled, remote access
features such as virtual KVM are not available.
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Description
Options are On without Console Redirection, On with
Console Redirection via COM1, On with Console
Redirection via COM2, and Off.
Specifies the address of the serial ports.
Specifies whether Serial Device1, Serial Device2, or
Remote Access Device has access to the external serial
connector.
Displays the failsafe baud rate used for console
redirection. This rate should not be adjusted.
Options are VT100/VT220 or ANSI.
Enables or disables BIOS console redirection after the
operating system boots.
Using the System Setup Program and UEFI Boot Manager
65