Dell PowerEdge T710 Hardware Owner's Manual page 35

Table 1-1. LCD Status Messages (continued)
Code Text
E201D Shutdown test
failure. Power
cycle AC.
E201E POST memory
test failure.
Check DIMMs.
E2020 CPU
configuration
failure. Check
screen
message.
E2021 Incorrect
memory
configuration.
Review User
Guide.
E2022 General
failure during
POST. Check
screen
message.
E2023 BIOS Unable to
mirror memory.
Check DIMMs.
Causes
BIOS shutdown test
failure.
BIOS POST memory test
failure.
Processor configuration
failure.
Incorrect memory
configuration.
General failure after video. Check screen for specific
The system BIOS could
not enable memory
mirroring because of a
faulty memory module or
an invalid memory
configuration.
Corrective Actions
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 193.
See "Troubleshooting
System Memory" on
page 167.
If the problem persists,
see "Getting Help" on
page 193.
Check screen for specific
error messages. See
"Troubleshooting the
Processors" on page 179.
Check screen for specific
error messages. See
"Troubleshooting System
Memory" on page 167.
error messages.
See "Troubleshooting
System Memory" on
page 167.
About Your System
35