Installing a Hard Drive Into a Hard-Drive Carrier
1 Insert the hard drive into the hard-drive carrier with the connector end
of the drive at the back. See Figure 3-8.
2 Align the screw holes on the hard drive with the set of holes on the hard-
drive carrier.
When aligned correctly, the back of the hard drive will be flush with the
back of the hard-drive carrier.
3 Attach the four screws to secure the hard drive to the hard-drive carrier.
Figure 3-8. Installing a Hard Drive Into a Hard-Drive Carrier
2
1
1
hard-drive carrier
3
hard drive
2
screws (4)
Installing System Components
3
93