Jumpers And Connectors; System Board Jumpers - Dell PowerEdge T710 Hardware Owner's Manual

Jumpers and Connectors

WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.

System Board Jumpers

For information on resetting the password jumper to disable a password, see
"Disabling a Forgotten Password" on page 192.
Table 6-1. System Board Jumper Settings
Jumper Setting
PWRD_EN
NVRAM_CLR
Description
(default) The password feature is enabled
The password feature is disabled, and iDRAC6
local access is unlocked at the next AC power
(pins 4-6)
cycle
(default) The configuration settings are retained at system
boot (pins 3-5)
The configuration settings are cleared at the next
system boot (pins 1-3)
Jumpers and Connectors
(pins 2-4)
185