Processor Settings Screen - Dell PowerEdge T710 Hardware Owner's Manual

Processor Settings Screen

Option
64-bit
Core Speed
Bus Speed
Logical Processor
(Enabled default)
Virtualization Technology
(Disabled default)
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
(Enabled default)
C States
(Enabled default)
Processor 1 Family -Model-
Stepping
62
Using the System Setup Program and UEFI Boot Manager
Description
Specifies if the processors support 64-bit extensions.
Displays the processor clock speed.
Displays the processor bus speed.
On processors that support Simultaneous Multi-
Threading (SMT) technology, each processor core
supports up to two logical processors. If this field is set to
Enabled, the BIOS reports both logical processors. If set
to Disabled, only one logical processor is monitored by
the BIOS.
NOTE:
Disable this feature if your system will not be
running virtualization software.
Enabled permits virtualization software to use the
virtualization technology incorporated in the processor.
Enables or disables execute disable memory protection
technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
When set to Enabled, the processor(s) can operate in all
available power states.
Displays the family, model and stepping of the selected
processor.