Intruder Alert - Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual

Server Configuration and Utilities 5-7
IRQ Summary displays the list of all interrupts (IRQs) in the system, as well
as the devices using the IRQs.
APIC Table allows users to manually assign the table that is generated for the
operating system. By default, this selection is automatically set based upon the
primary operating system. In the event that you have selected "Other" as the
primary operating system, this menu allows manual override.
The mapped table is a configuration that represents the legacy IRQ
assignments for all devices in the system. The full table is a configuration that
represents the broadest interrupt assignments for devices in the system,
minimizing interrupt sharing at the possible expense of compatibility with
older operating systems.
Automatic Server Recovery enables and disables the ASR feature.
Wake Support enables and disables the wake support (PME), such as
Wake on LAN.
Network Server Mode (NSM) enables and disables the ability to start the
system without a keyboard. When enabled, this option can be used to lock out
the keyboard until the power-on password is successfully entered. The default
setting for NSM is disabled.
F1 Prompt enables and disables the F1 prompt option. When enabled, the
system ROM halts the system at the F1 prompt and alerts the user of an error
condition or system configuration change. The default setting for the F1
prompt is enabled.
Intruder Alert enables and disables the intruder alert option. When enabled,
an intruder alert message is displayed if the front bezel has been unlatched or
removed. The default setting is disabled.