LEDs
A variety of status LEDs are located on the front and back of your server.
These LEDs aid you in diagnosing problems by communicating the status of
the components and operations of the server. The following ProLiant
ML330e/ML330 server LEDs are explained in this appendix.
I
System status LEDs (on the front of the server)
G
Power On/Standby and AC power status
G
Hard drive status
I
Network controller LEDs (on the back of the server)
G
Network activity status
G
Network link
G
Connection speed
System Status LEDs
The system status LEDs and the power button are located on the front of the
server, and are visible when the bezel door is open.
The system status LEDs show:
I
Power On/Standby status
I
Hard drive status
The power button allows you to:
I
Power up the server (provide AC power)
I
Place the server in standby mode
I
Power down the server
LED Indicators, Switches, and Jumpers E-3