Problems After Initial Boot - Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual

Problems After Initial Boot

After your server has passed the Power-On Self-Test (POST), you may still
encounter errors, such as an inability to load your operating system. Use
Table D-4 to troubleshoot server installation problems that occur after the
initial startup.
For updated information on supported operating systems, log on to the
Internet at
http://www.compaq.com/products/servers/platforms/
NOTE: If the server is rebooting repeatedly, verify that the system is not restarting due to
an Automatic Server Recovery (ASR) powerup caused by another problem. Check Compaq
Insight Manager for notification of this event. Refer to the Compaq Servers
Troubleshooting Guide for more information.
Refer to the Compaq Servers Troubleshooting Guide for the following:
I
Information you will need to collect when diagnosing software problems
and to provide when contacting support.
I
Instructions on how to upgrade your operating system and its drivers,
what recovery options are available, and advice on minimizing
downtime
Troubleshooting D-7