Minimum Hardware Configuration - Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual

Minimum Hardware Configuration

Make sure that your server meets the requirements for minimum hardware
configuration. During the troubleshooting process, it may be necessary to
reduce your system to its minimum configuration, reinstalling options one at a
time to determine the cause of failure.
Component
Processors
Server Feature
Board
Fans
Memory
NOTE: The maximum memory configuration is 4 x 512-MB memory modules.
Also refer to the Compaq ProLiant ML330e/ML330 Server Maintenance and
Service Guide at the Compaq website:
http://www.compaq.com/support
Table F-2

Minimum Hardware Configuration

Minimum Specification
A processor must be installed in the processor slot.
The Server Feature Board is installed in PCI slot 3. The Server
Management Information Cable (SMIC) must be connected.
A system fan must be installed and connected to the system board,
and a CPU fan must be installed and connected to the CPU heatsink.
At least one slot must be populated with an ECC 133-MHz Registered
SDRAM DIMM.
Specifications F-3