Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual page 72

4-6 Compaq ProLiant ML330e/ML330 Server Setup and Installation Guide
Connecting Internal Hard Drives to
Smart Array Controllers
Many configurations are possible when multiple SCSI controllers are added.
This section outlines the cabling procedure for the Smart Array Controller.
Refer to the Smart Array Controller options documentation for further
information.
The following steps outline the installation procedure for the Smart Array
Controller:
1. Follow the steps in the sections following "Installing a Hard Drive" in
Chapter 3.
2. Locate the Wide Ultra2 SCSI cable connected to the Server Feature
Board SCSI connector.
3. Remove the cable from the SCSI connector.
Figure 4-5. Removing the Wide Ultra2 SCSI cable from the
Server Feature Board