Problems After Initial Startup - Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual

D-8 Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide

Problems After Initial Startup

After your server has passed POST, you may still encounter errors, such as an
inability to load your operating system. Use Table D-4 to troubleshoot server
installation problems that occur after the initial startup.
For updated information on supported operating systems, refer to Appendix F,
"Specifications," or visit the Compaq website at
http://www.compaq.com/products/servers/platforms/
NOTE: If the server is rebooting repeatedly, verify that the system is not restarting due to
an Automatic Server Recovery-2 (ASR-2) powerup caused by another problem. Check
Compaq Insight Manager for notification of this event. Refer to the Compaq Servers
Troubleshooting Guide for more information.
Refer to the Compaq Servers Troubleshooting Guide for the following:
I
Information you must collect when diagnosing software problems and to
provide when contacting support.
I
Instructions on how to upgrade your operating system and its drivers.
I
Information on available recovery options and advice on minimizing
downtime.