4 With the lever on the hard drive carrier open, slide the hard drive into
the drive bay until the carrier contacts the backplane. See Figure 3-8.
5 Close the handle to lock the drive in place.
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-9.
Figure 3-9. Installing a Hot-Swap Hard Drive Into a Drive Carrier
4
3
1
hard drive
3
drive carrier
94
Installing System Components
2
SAS/SATA indicator
4
screws (4)
1
2