Removing An Idrac6 Express Card - Dell PowerEdge R510 Hardware Owner's Manual

Figure 3-23. Installing or Removing an iDRAC6 Express Card
1 iDRAC6 Express card
3 notch
7 Reinstall all expansion cards in the expansion-card riser. See "Installing an
Expansion Card" on page 124.
8 Close the system. See "Closing the System" on page 89.
9 Reconnect the system and peripherals to their power sources, and turn
them on.

Removing an iDRAC6 Express Card

CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 87.
3
4
2 plastic standoff tab
4 clip
Installing System Components
1
2
133